| Product Releases from the year 2008 |
| |
| Littelfuse Series 159 – The 159 Series product is a metal fuse clip with preinstalled Littelfuse 461 Series TeleLink® fuse. |
| Littelfuse Series 477 – The 477 Series is the first and smallest 500VAC and 400VDC fuse under the class of 5x20mm fuse family. |
| Littelfuse Series 505 – The 505 series is the first 500VAC/VDC rated, ceramic fuse in the 6x32mm Littelfuse product family. |
| A3290 and A3291 – Chopper-stabilised precision Hall-effect latches in small, robust packages with reverse battery protection |
| A3942 – Four-channel high-side control/driver IC for automotive systems |
| A1172 – Ultra-sensitive micropower Hall-effect switch IC |
| A1360 – Low-noise programmable linear Hall-effect sensors with high bandwidth |
| A3941 – Automotive-grade full-bridge MOSFET pre-driver IC |
| ACS756 – Next-generation Hall-effect current sensor combines high speed and low noise for 50-100 A current measurements |
| A6282 – 16-channel LED driver IC with serial input/output interfacing |
| A4490 – Triple-output stepdown switching regulator IC |
| A1351 – Precision linear Hall sensor for current and position sensing applications |
| A1444 and A1445 – Low-voltage full-bridge brushless DC motor driver ICs with integrated Hall commutation and internal PWM speed control |
| A6285 – Constant-current LED driver features 16 channels and 7-bit dot correction |
| A3930 – Automotive-grade 3-phase motor-control ICs with built-in commutation logic |
| A6260 – Automotive-grade high-brightness constant-current LED driver IC |
| ACS714 and ACS715 – Automotive-grade Hall-effect linear current sensors offer high accuracy |
| |
| Product Releases from the year 2007 |
| |
| A4931 – Three-phase brushless DC motor pre-driver IC |
| A4401 – Flyback convertor IC is ideal for driving vacuum fluorescent displays |
| A3904 – Low-voltage voice-coil motor driver IC with I2C interface |
| A6281 – Three-channel constant-current LED driver with PWM brightness control for large display applications |
| A3423 – Dual-channel Hall-effect direction detection sensor with built-in fault protection |
| ACS760 – Hot-swap protection IC uses Hall-effect current sensing |
| ACS712 and ACS713 – High-performance low-noise current sensors with 2100 V RMS isolation |
| A3995 – DMOS Dual Full Bridge PWM Motor Driver |
| A3989 – Bipolar Stepper and High Current DC Motor Driver |
| A8434 – 6-Channel High Efficiency Charge Pump White LED Driver |
| A8286 and A8292 – Single and Dual LNB Supply Voltage Regulators |
| A6850KL – Dual-Channel Switch Interface IC |
| A3987 – High-Voltage Microstepping Motor Driver IC |
| |
| |
| Lead Free – 01.07.2006 |
| |
| Lead Free |
| Useful Links |
| Manufacturer Informations |
| |
| |
| Product Releases from the year 2006 |
| |
| A6280 – Three-Bit Constant-Current LED Driver |
| A3992 – DMOS Dual Full-Bridge Microstepping Driver |
| A138X family – Programmable Hall sensor ICs in low-profile surface-mount package |
| A8530 – High-efficiency white LED driver IC for display backlight and flash/torch applications |
| A3969 – Dual Full-Bridge PWM Motor Driver |
| A3988 – Quad DMOS Full Bridge PWM Motor Driver |
| A1391 and A1392 – Micropower linear Hall-effect sensor ICs for battery-powered applications |
| A8498 – General-Purpose Buck Regulator for a Wide Variety of Applications |
| A3986 – New dual full-bridge microstepping driver |
| A3901 – Dual Full-Bridge Low-Voltage Motor Driver |
| A1373 and A1374 – Programmable linear Hall-effect sensor ICs |
| ATS642LSH – True zero-speed sensor includes running mode calibration |
| ACS755 – New additions to high-accuracy current sensor family |
A1242 – Chopper-stabilised Hall-effect latch for motor-speed and direction-sensing
applications |
| ATS635/636 Series – Programmable Hall-effect switches for gear-tooth or proximity sensing |
| |
| |
| Product Releases from the year 2005 |
| |
| ACS706
– Bidirectional linear current sensor family offers
20 A dynamic range |
| ATS651LSH
– Automotive Hall-sensor module uses patented algorithms
to minimise vibration effects |
| MXR9500 – MEMSIC announced today volume production availability of the MXX9000 triaxis accelerometer |
| A1441
– Full-bridge motor driver IC integrates Hall element
and motor control circuitry |
| A142x
Series – Hall-effect gear-tooth sensors
with integrated filter capacitors |
| A3979
– Microstepping motor driver IC with built-in translator
circuitry |
| A6800
and A6801 – Latched sink driver ICs
use Allegro's DABiC-5 merged BiMOS process |
| A8483
– Step-up convertor IC is ideal for display applications |
| A110X
– Unipolar switch family offers high performance
and new packaging options |
| ATS616LSG
– Analogue self-calibrating speed sensor |
| A8431
– DC/DC convertor IC for driving white LEDs |
| A3241,
A3242, A3230 and A3282 – Hall-effect
switches and latches |
| A120x
– Ultrasensitive Hall-effect switches are drop-in
higher-performance replacements for earlier versions |
| A3245
– World's first omnipolar Hall-effect sensor for
3.6 V to 24 V applications |
| ATS673
and ATS674 – Self-calibrating gear-tooth
sensors feature true power-on state recognition |
| A3213
and A3214 – Micropower omnipolar digital
Hall-effect switches are ultra-sensitive |
| A1301
and A1302 – Continuous-time linear
Hall-effect sensors in SOT23 package |
| ACS704
– Stromsensoren auf Hallsensorbasis im SOIC-8 Gehäuse |
| |
| |
| Product Releases in the year 2004 |
| |
| ACS754/5
– High-accuracy addition to current-sensor family |
| Serie
6000 – Beschleunigungssensoren für
Batterieanwendungen und Car-Alarm |
| ATS650LSH
– Two-wire wheel-speed and direction sensor for
ABS applications |
| ATS643LSH
– Gear-tooth sensor for automotive transmission
applications |
| A8285/8287
– LNB regulator IC family for satellite set-top
boxes |
| A3980
– Automotive DMOS microstepping driver IC with built-in
translator |
| A3949
– DMOS full-bridge motor driver IC |
| A3245/6
– Omnipolar Hall-effect devices for reed-switch
replacement |
| A1425
– High-accuracy speed sensor is ideal for automotive
crankshaft applications |
| A132X
– Ratiometric linear Hall-effect sensors are stable
over wide temperature range |
| A118X
– Programmable Hall-effect switch ICs are chopper-stabilised
at high temperatures |
| A114X
– Two-wire, chopper-stabilised unipolar Hall-effect
switch |
| ACS752
– Hall-effect current sensor offers higher bandwidth
and enhanced accuracy |
| A8904
– Three-phase brushless DC motor controller/driver
IC |
